3102.10 (DKZ103 DN 80) - Warex Taiwan Sales

BRAND	Warex
Product	3102.10 (DKZ103 DN 80)
Description	Butterfly valve
Internal code	IMP252839
Weight	1
Technical specification	for medium: bulk chemical not aggressive, not sticky working pressure : 1,0 bar max. allowable working pressure : 2,0 bar (Ps) MAWP (Note: MAWP = design pressure) max. allowable working temperature: 0° C to +60° C (Ts) MAWT ambient temp.: 0° C to +50° C (Ta) Ex-protection : not required Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment WAREX-butterfly valves, type: DKZ 103 for mounting between flanges, drilled in acc. to EN 1092, PN 10 body of Silumin sealing element of silicone red into the body vulcanized disc of stainless steel 1.4408 for DN 50...350, otherwise 1.4301 shaft of stainless steel 1.4057 or equivalent shaft sealing with O-rings bearing bush of brass test pressure: design pressure x 1,1 bar for tightness DN 80 face to face: 46 mm AT60 fitted with pneumatic actuator, type. AT 60.DR - double acting - air supply necessary: 6 bar 401 with mounted 5/2 way solenoid-valve, Norgren Herion, type 2623077.3037 voltage: 24 V DC 1,6 W - Namur interface - protection IP 65 electroless closed 611 fitted with 2 proximity switches make. Turck, type: Ni 4-M12-AZ 31X (shutter) 20-250 V AC / 10-300 V DC; mounted in macrolon housing 175/80/55, clamped on terminal block

Please Contact Us to Order to offer competitive prices and delivery time for Warex - 3102.10 (DKZ103 DN 80) Butterfly valve number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Taiwan Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

More products of Warex

3671

shaft sealing kit DKZ 110/103/110APS/103APS suitable for DN 50 - DN 100 o-rings of NBR

5125.APS DN 150

Baulänge: 56 mm with bare shaft, square 17 mm with DIN/ISO 5211, F07

5132 / DN 80

(Length: mm 39 AT30 - 1 unit, with built-pneumatic rotary drive. Type: AT 30, DR - double acting -erforderl. Control pressure: 6 bar, 7999-switching cam for IFM double initiator)

5145

DN 150 face to face: 56 mm with bare shaft, prepared for actuator, type: AT 60 DR

59APSD (for DKZ 110 APS / DN 300)

Sealing sleeve made of silicone graysuitable for DKZ110 APS / DN 150

59APSS

disc of stainless steel 1.4408 suitable for DKZ 110 APS / DN 150

59D für DKZ 110 / DN 500

Sealing collar

59W

shaft no. 34 of stainless steel 1.4057 suitable for DKZ 110 / DN 65

DICHTMANSCHETTE AUS SILIKON GRAU PASSEND FUR DKZ 110 APS / DN 150

Sealing sleeve made of silicone gray fits