Pibomulti is offered by Impexron GMBH for years at reasonable prices and delivery time to Taiwan . Check our web page for products from the brand Pibomulti regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout Taiwan .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Drive shaft
SWITCH CAM
Body
SWITCH CAM
Pibomulti - turret type TRH 156 with 6Arbeitsstationen (without screws) Indexing via a Hirth coupling, hydraulically locked Rest as above.
Pibomulti - turret type TRH 200 with 4Arbeitsstationen (without screws) Indexing via a Hirth coupling, hydraulically locked Rest as above.
Pibomulti - turret type TRH 200 with 6Arbeitsstationen (without screws) Indexing via a Hirth coupling, hydraulically locked Rest as above.
Pibomulti - turret type TRH 154 with 4Arbeitsstationen (without screws) Indexing via a Hirth coupling, hydraulically locked Rest as above.
Revolver as item 1, but with only 4 workstations
turret type TRI 156 with 6 workstations (without screws) Indexing on indexing pin, hydraulically operated, Drive shaft for spindle mode and turret mode hyd.betätigt Drive the spindles and the turret (swing) by servo motor (servo motor is not included in offer) transmitted power of 5 kW max. Torque 30 Nm max. Speed 15,000 rev / min (Depending on the type of spindle and lubrication) Precision of the spindle position + - 2 " Repeatability of the spindle position + - 10 " Indexing time - 1/6 turn 0.6 sec (direct drive, depending on the Motoriesierung) Oil mist lubrication Blocking air to the spindles External coolant supply 15 bar controls: the items 1 - 6 by proximity switches the locking of the indexed position the drive shaft, front / rear Positioning of the drive shaft for all positions
Revolver as item 1, but with only 4 workstations
Pibomulti - turret type TRI 156 with 6 workstations (without screws) Indexing on indexing pin, hydraulically operated, Drive shaft for spindle mode and turret mode hyd.betätigt Drive the spindles and the turret (swing) by servo motor (servo motor is not included in offer) Transmitted power 10 kW max. Torque 80 Nm max. Speed 8000 r / min (Depending on the type of spindle and lubrication) Precision of the spindle position + - 2 " Repeatability of the spindle position + - 10 " Indexing time - 1/6 turn 0.6 sec (direct drive, depending on the Motoriesierung) Oil mist lubrication Blocking air to the spindles External coolant supply 15 bar controls: the items 1 - 6 by proximity switches the locking of the indexed position the drive shaft, front / rear Positioning of the drive shaft for all positions
Coolant cartridge max. Pressure 50 bar Built revolver side
The RING
The RING
High-speed spindles
High-speed spindles
Pibomulti - speed spindle type X1205 with taper SK 50 DIN 69871 A
SPINDLE DRIVE DOG
SPINDLE TR20/DIN55058
TOTAL SPINDLE ASSY – TR20/DIN55058/B
Zwischenring
Werkzeughalter
Speed head
High speed spindle
Indexing and torque reduction
stop block
pliers
